Doosan Excavator Face Seals in Minnesota - We are the primary carrier of Loader Attachments in Minnesota. We maintain easy access to 100s of vendors around the entire world and can easily supply all of your new and used equipment needs.
Consider the Fast Charge Option
There is an old rule of thumb about recharging forklift batteries. It goes something like: use a battery for 8 hours, charge it for 8 hours and then finally, let it cool for 8 hours. This formula has changed for many work applications that run more than one 8 hour shift. The fast charging alternative has become a really popular alternative to conventional charging and since its evolution; numerous businesses have chosen to make the switch.
What Are the Benefits of Fast Charging?
Less Charging Time
Where the standard charger and battery was concerned, re-energizing a battery from a 20% state of charge up to a complete one hundred percent charge used to take approximately 8 hours. Fast charging can now accomplish this same charging in approximately an hour to an hour and a half! Many companies use scheduled lunch and break times to complete this vital task.
Easier Refills
The fast charge batteries will usually require a single-point watering system. This system means that users do not need to remove the battery from the forklift to be able to water it.
Temperature-Sensitive Design
These new fast charge batteries have a thermistor located near the center cell in order to monitor temperature. Once the temperature gets to a specific level, the charge rate is reduced and sometimes even stopped in order to make sure the battery does not overheat. This method can unfortunately result in an undercharged battery. There are some particular fast charge battery brands that utilize extra thick posts, copper inserts and inter-cell connectors so as to increase conductivity and reduce heat generation because of the higher current. These features help to enable the battery to accept a higher charge rate for a longer time period.
These machines have seen their overall productivity increase significantly since the fast charge battery system was developed. Before, businesses used to require more than one machinery when they were operating around the clock; now they could save much money and use one forklift twice as much in a day with by using the fast charging batteries.
There are numerous alternatives and attachments offered for lift trucks. Although the majority of attachments are made to be used on regular lift trucks, there are some designed to be utilized on VNA and reach trucks. It is very important to note that OSHA needs approval for any kind of attachment that must be approved for use by the particular lift truck manufacturer.
The most essential common attachment is the sideshift and is considered to be standard equipment. The sideshift apparatus enables the fork carriage to slide right and left as well as allow for more accurate load positioning. The sideshift enables the operator to be more versatile with the equipment.
Fork positioners are an attachment choice that allows the operator to adjust the distance between the forks from the cab of the truck. This particular attachment is mostly used in high volume operations where there is a wide range of pallet and crate sizes handled.
The fork pivot allows the carriage and forks to rotate or pivot. Used for dumping and transporting hoppers that is especially designed. These attachments are very helpful for various industrial operations.
Slip sheet attachments are another attachment which are used where slip sheets that is plastic, or paperboard or a sheet of cardboard which are used rather than pallets. The slip sheet attachments utilize a push and pull device which clamps onto the slip sheet and pulls the load onto a thin platform. Afterward, the load is pushed off the platform when the truck reaches the destination.
Drum handling attachments come in many different designs. They are many different models attached to handle fifty five gallon drums. There are some smaller versions of a paper roll clamps which go around the roll and also are capable of a full three hundred sixty degree rotation. There are other types of drum attachments that could pick up a variety of drums all at once.
Another option is tilt control, that enables the operator to preset the fork tilt angles. For extensions slide over the forks to help pick up and move longer loads. The Carton clamp operates similar to a paper roll clamp except rather than being circular, the clamping surface is flat.
